● The lathe bed is made on high-strenght cast iron FC-25.
● The bed with high tensile structure for heavy catting feature.
● Lower portions of bed casting are box-shaped and with chip pan use.
 | HEADSTOCK ● The main spindle is forging as whole-body and sustained by precision bearings. The speeds of spindle have 12 steps and designed on theoretical base. ● All gears and shafts are made of Ni-Cr-Mo steel and carbonize and ground. ● Control of main drive through electromagnetic brake, and automatic forced lubrication. |
 | GEAR BOX ● The Gear box is entirely enclosed contruction and provide a large of feedings or thread cuttings (inch, metric, module pitch and diametral pitch). Inch and Metric threading with out changing gear. ● Oil both lubrication and built in safety clutch safeguard the continuous and proper operation of the universal gear box. |
 | CARRIAGE & APRON ● The compound rest can be fixed the cross-silde anywhere, convenient cutting work application. ● The apron have automatic lubrication and locked-safe device protect threads and feeding same as operation. Rapid traverse drive for longitudinal-cross feeding and forward & reverse feed are operating very light and convenience. |
 | TAPER ATTACHMENT ● The taper attachment was designed for easy operate and rapid cut taper in high accuracy, the device will produce a ±10 angles. ● Electric cable in steel cover to protect wire from chips and preventing trouble with electric wires. |
| Item | SHE | ||
| Model | SHE-59 | SHE-65 | SHE-71 |
| CAPACITY | |||
| Swing Over Bed | 1500mm(59") | 1650mm(65") | 1800mm(71") |
| Swing Over Cross Slide | 1200mm(47") | 1350mm(53") | 1500mm(59") |
| Swing in Gap | 2050mm(80") | 2200mm(86") | 2350mm(92") |
| Width of Gap | 560mm(22'") | ||
| Distance Between Centers | 2000mm 3000mm 4000mm 5000mm 6000mm 7000mm 8000mm 9000mm 10000mm 11000mm 12000mm | ||
| HEADSTOCK | |||
| Spindle Bore | 153mm(6"),230mm(9")(OPT),260mm(10")(OPT) 308mm(12")(OPT.),360mm(14")(OPT),410mm(16")(OPT.) | ||
| Spindle Nose | A2-15,A2-20 (OPT.) | ||
| Taper of Center | M.T.No.6, M.T.No.7 (OPT.) | ||
| Range of Spindle Speeds | (9")(10") 3~320RPM, 5~500RPM(OPT.) (6"),(12"),(14"),(16"), 2.5~250RPM, 4~400RPM(OPT.) | ||
| Number of Spindle Speeds | 12 Changes | ||
| FEEDS & THREADS CUTTING | |||
| Diameter of Leadscrew | 57mm(2-1/4") | ||
| Pitch of Leadscrew | 2 T.P.I. or P 12mm (OPT.) | ||
| Inch Threads | 1/4~30 T.P.I. (70kinds) | ||
| Metric Threads | 1~120mm (62kinds) | ||
| D.P. Threads | 1~120D.P. (70kinds) | ||
| M.P. Threads | 0.25~30 M.P. (53kinds) | ||
| Longitudinal Feeds | 0.085~10.08 mm/rev | ||
| Cross Feeds | 0.042~5.04mm/rev | ||
| CARRIAGE | |||
| Cross slide Travel | 950mm (38") | ||
| Compound Rest Travel | 420mm (16 1/2") | ||
| Rapid Travel Speed to Carriage(Long) | 2000mm/min (80"min) | ||
| Raped Travel Speed to Cross Slide (Cross) | 950mm/min (37"/min) | ||
| TAILSTOCK | |||
| Quill Diameter | Ø180mm | ||
| Quill Travel | 300mm | ||
| Taper of Quill Center | M.T.No.6, M.T.No. 7(OPT.) | ||
| BED | |||
| Width of Bed | 850mm (33") | ||
| Main Motor | 25HP, 30HP, 40HP, (OPT.) | ||
| Rapid Travel Motor | 1 HP | ||
| Packing Size (cm) LxWxH |
L465~1465 | ||
| Weight (Approx) KG | 11200~25200 | ||
| Standard ● Center Sleeve x 1pc ● Center x 2pcs ● Tool Box x 1set ● Anchor Bolt and Washer x 1set ● 4Jaw Chuck 45"(Face Plate Type) x 1pc ● Steady Rest x1pc ● 4-Way Rapid Traverse Device x 1set ● Electromagnetic brake x 1pc | Option Accessories ● 3-Jaw Scroll Chuck 20" x 1pc ● 4-Jaw independent Chuck 26" x 1pc ● Follow Rest x 1pc ● Coolant Equipment x 1set ● Taper Attachment x 1set |
