WORLDWIDE
Home > Products
Products
Features
| ● | Hardened ground bedways are made of high tensile cast iron. |
| ● | The main spindle is supported by high precision bearings can be used for precise and heavy cutting. |
| ● | All gears are made of Cr-Mo steel. They have been manufactured with carbonization hardness, precisely ground by precision gear grinding machine. |
| ● | Head stock have 12 steps speed and designed for quick and easy speed changes. |
| ● | All standard thread pitches can be obtained without changing the gears including MM. & INCH. threads |
| ● | An inner lock device is also equipped on this High Speed Precision Lathe to provide the thread cutting and autofeding operation at the same time. |
| ● | Longitudinal and cross feed possess safety device. If the carriage meets any obsruction on the bed, the overload safety device will release and prevent feed for avoiding damage. |
| ● | Electrical equipment with magnetic contactor and overload safety devices to avoid any destroy or accident on machine. |
| ● | The emergency brake pedal can be used for cutting the power and stopping the machine immediately and safe fast precise operation. |
| ● | The strong and rigid tailstock is easy to move and ensures maximum cutting accuracy for long distance support. |
Specification
| ITEM |
430 | 470 | |||
| Swing Over Bed | 430mm | 470mm | |||
| Swing Over Cross Slide | 240mm | 280mm | |||
| Swing Over Gap | 760mm | 690mm | |||
| Distance Between Centers | 760mm | 1000mm | 1500mm | 1000mm | 1500mm |
| HEADSTOCK | |||||
| Spindle Bore | 58mm x 78mm (OPT) | ||||
| Type of Spindle Nose | A1-6 * A1-8 (OPT) | ||||
| Taper of Center | MT No.4 | ||||
| Number of Spindle Speeds | 12 Changes | ||||
| Range of Spindle Speeds | 20-2000RPM * 40-2000R (OPT) | ||||
| FEEDS & THREADS CUTTING | |||||
| Lead Screw | 35mm x 4 T.P.I. or P 6mm (OPT) | ||||
| Range of Inch Threads | 4-56 TPI | ||||
| Range of Metric Threads | 0.5-7mm | ||||
| Range of Longitudinal Feeds | 0.05-0.8mm | ||||
| Range of Cross Feeds | 0.02-0.36mm | ||||
| CARRIAGE | |||||
| Cross slide Travel | 250mm | ||||
| Compound Rest Travel | 125mm | ||||
| TAILSTOCK | |||||
| Tail Stock Diameter of Spindle | 58mm | 68mm | |||
| Tail Stock Spindle Travel | 150mm | ||||
| Tail Stock Taper of Center | MT No. #4 | ||||
| Width of Bed | 300mm | ||||
| Motor | 5HP * 7 1/2HP (OPT) | ||||
| Weight(Approx)kg | 1700~2150 | ||||
| Packing Size(LxWxH)cm |
L:198~279 W:95 H:162 | ||||
| Standard ● Back Plate x 1pc ● Center MT #4 x 2pc ● Center Sleeve x 1pc ● Tool Post Wrench x 1pc ● Tool Box x 1set | Option Accessories ● 3-Jaw Scrool Chuck Ø9" x 1pc ● 4-Jaw Independent Chuck Ø10" or Ø12" x 1pc ● Follow Rest x 1pc ● Coolant Pump x 1 set ● Taper Attachment x 1set ● Steady Rest x 1pc ● Rear Cutter Rest x 1pc |
