Products
Heavy Duty Precision Lathe

SHF Series

Heavy Duty Precision Lathe

Description

The lathe bed is made on high-strenght cast iron FC-25.
The bed with high tensile structure for heavy catting feature.
Lower portions of bed casting are box-shaped and with chip pan use.

Features
HEADSTOCK
The main spindle is forging as whole-body and sustained by precision bearings.
   The speeds of spindle have 12 steps and designed on theoretical base.
All gears and shafts are made of Ni-Cr-Mo steel and carbonize and ground.
Control of main drive through electromagnetic brake, and automatic forced lubrication.
GEAR BOX
The Gear box is entirely enclosed contruction and provide a large of feedings or thread cuttings (inch, metric, module pitch and diametral pitch). Inch and Metric threading with out changing gear.
Oil both lubrication and built in safety clutch safeguard the continuous and proper operation of the universal gear box.
CARRIAGE & APRON
The compound rest can be fixed the cross-silde anywhere, convenient cutting work application.
The apron have automatic lubrication and locked-safe device protect threads and feeding same as operation. Rapid traverse drive for longitudinal-cross feeding and forward & reverse feed are operating very light and convenience.
TAPER ATTACHMENT
The taper attachment was designed for easy operate and rapid cut taper in high accuracy, the device will produce a ±10 angles.
Electric cable in steel cover to protect wire from chips and preventing trouble with electric wires.
Specification
Item SHF
Model SHF-67 SHF-73 SHF-79

CAPACITY

Swing Over Bed 1700mm(67") 1850mm(73") 2000mm(79")
Swing Over Cross Slide 1370mm(54") 1520mm(60") 1670mm(66")
Swing in Gap 2250mm(88") 2400mm(94") 2550mm(100")
Width of Gap 610mm
Distance Between Centers 2000mm 3000mm 4000mm 5000mm 6000mm 7000mm 8000mm 9000mm 10000mm 11000mm 12000mm

HEADSTOCK

Spindle Bore 153mm(6"),205mm(8")(OPT.)
Spindle Nose A2-15
Taper of Center M.T.No.7
Range of Spindle Speeds 1.7~170RPM. 2.5~250RPM(OPT.)
Number of Spindle Speeds 12 Changes

FEEDS & THREADS CUTTING

Diameter of Leadscrew 65mm(2-1/2")
Pitch of Leadscrew 2 T.P.I. or P 12mm (OPT.)
Inhch Threads 1/2~28 T.P.I. (50kinds)
Metric Threads 2~56mm (32kinds)
Longitudinal Feeds 0.08~5 mm/rev
Cross Feeds 0.04~2.5mm/rev

CARRIAGE

Cross slide Travel 1000mm
Compound Rest Travel 225mm
Upper layer Rest Travel 150mm
Rapid Travel Speed to Carriage (Long) 2000mm/min (80"/min)
Rapid Travel Speed to Cross Slide (Cross) 1000mm/min (40"/min)

TAILSTOCK

Quill Diameter Ø180mm (
Quill Travel 300mm
Taper of Quill Center M.T.No.7

BED

Width of Bed 1016mm (40")
Main Motor 30HP, 40HP(OPT), 50HP(OPT.)
Rapid Travel Motor 2 HP
Packing Size (cm)
LxWxH

L550~1550
W227
H252

Weight (Approx)
KG
15000~35000
   
Standard
Center Sleeve x 1pc
Center x 2pcs
Tool Box x 1set
Anchor Bolt and Washer x 1set
4Jaw Chuck 55"(Face Plate Type) x 1pc
Steady Rest x1pc
4-Way Rapid Traverse Device x 1set
Electromagnetic brake x 1pc
Option Accessories
4-Jaw independent Chuck 28" x 1pc
Follow Rest x 1pc
Coolant Equipment x 1set
Taper Attachment x 1set
Loading...